Tuesday 5:30pm - 10:30pm
This course gives students the basic understanding of pressure, level, temperature, flow and analytical instrumentation. Sensors, transmitters, recorders, controllers, their selection, calibration, installation, repair, and troubleshooting will be explored. Position measurement sensors and their applications will also be covered. Control systems documentation including piping and instrumentation diagrams and loop diagrams will be taught. Instrumentation and process control systems safety aspects will be emphasized. The student will set up and operate various process control instruments and analyze their performance.
General Education Outcomes are the knowledge, skills, abilities, attitudes, and behaviors that students are expected to develop as a result of their overall experiences with any aspect of the college, including courses, programs, and student services, both inside and outside of the classroom. The General Education Outcomes specifically learned in this course are:
- Critical Thinking
Faculty Contact Information
4:00pm - 5:30pm Mon-Thur
Course Information
At the end of this course, students will be able to:
- Understand basic principles of pressure, level, temperature, flow, analytical, and position measurements.
- Select sensors and transmitters for the particular application.
- Calibrate, install and operate the most common sensors and transmitters.
- Classify and properly apply safety equipment in control systems.
- Interpret drawings used in process control systems, including P&ID and loop diagrams.
- Troubleshoot basic process control instruments and sens
Industrial Instrumentation and Process Control: Selected Chapters from Industrial Automation Systems: Instrumentation and Motion Control by Terry L.M.Bartelt, Cengage Learning, 2011.
ISBN-13: 978-1-337-03961-1 [REDSHELF E-TEXT]
Student achievement in the classroom phase of the course will be evaluated on the basis of homework, quizzes, and final exam. Achievement in the laboratory will be evaluated on the basis of the accuracy and completeness of laboratory activities reports; additionally, laboratory aptitude will be measured by skills developed in the performance of manipulative tasks as evidenced by the workmanship demonstrated in the laboratory assignments. Laboratory quizzes and a laboratory final examination may also be administered.
NOTE: The following evaluation method may be modified by the instructor as required. Letter grades are determined by the following percentage:
93 - 100 A 85 – 92.9 B 78 – 84.9 C 71 – 77.9 D BELOW 71 F
Grading for this class will be based on the following:
| Assignments | 25% |
| Lab Experiments | 25% |
| Quizzes | 20% |
| Final Exam | 30% |
| Total | 100% |
Assignments will NOT be accepted past the date due without prior approval. Missed quizzes may NOT be made up.
Remember: The instructor doesn’t “GIVE” grades! YOU earn your grade!
Business, Technology & Human Services
Dean, Paul Carlson; 815-802-8858; V105; pcarlson@kcc.edu; Division Office – W102; 815-802-8650
Attendance:
If a student has missed more class hours than the number of credit hours to be earned in the class, the instructor may record the grade of "F" for the course. Missed classes may not be made up without prior permission from the instructor. Failure of the student to attend class does not constitute withdrawal. A formal written withdrawal must be made by the student to the Office of Admissions and Records. Some important information provided during the lecture/discussions does not appear in your textbook, but you will find it useful for completing your assignments or exams. It is the student’s responsibility to obtain handouts and information presented for any class for which he/she is absent from fellow students or the instructor.
CELL PHONES: Use of cell phones is NOT permitted during class or lab. If there is an emergency, please leave the classroom prior to taking the call as a courtesy to other students. Cell phones/tablets/computers must be stowed out of sight during quizzes and exams.
Homework Policy:
Homework assignments are due at the assigned time on the day due. They can be accepted up to one week past the due date/time with a 10% penalty. Most homework assignments will be completed in Canvas.
Lab Policy:
Labs are due at the end of each lab period. They can be made up if the student notified the instructor prior to an absence. The instructor can be notified by phone, email, or in-person. The lab will not be counted for credit if the student leaves lab early without approval of the instructor or an unexcused absence. No students will be allowed to work in lab areas outside of class time without instructor permission and appropriate supervision.
Quiz Policy:
If a student cannot attend class to take a quiz, he/she must notify the instructor prior to the start time of the class. The instructor can be notified by phone, email, or in-person. A student must make advance arrangements to make up the quiz. The date and time of the makeup quiz must be mutually agreed to by the instructor and student. Any student missing a quiz without notifying the instructor in advance will receive a zero for the quiz.
All makeup quizzes must be completed within seven days after the scheduled quiz; otherwise, the student will receive a zero for the quiz.
The instructor reserves the right to provide a different make-up quiz.
Safety Policy:
School code requires that safety glasses or some other APPROVED form of eye protection be worn in the laboratory at all times. There will be NO exceptions!
Course Calendar
NOTE: This sheet gives the order in which the course material will be covered. It may be modified as needed. Labs are due at the end of each lab period. Written homework is due at the beginning of the class session for which it is assigned. Expect a quiz over the previous week’s reading assignment at the start of each lecture/discussion session.
| UNIT | SUBJECT |
| TEXT | |
| Unit 1 | Intro to Industrial Control Systems & Instrumentation Symbology (08/17) |
| CH 1 & CH 16 | |
| Unit 2 | Principles of Instrument Calibration - Part I (08/24) |
| Ch 18 and H/O | |
| Principles of Instrument Calibration - Part II (08/31) | |
| Unit 3 | Pressure Systems Part I (09/14) |
| CH 10 | |
| Pressure Systems Part II (09/21) | |
| Pressure Systems Part III (09/28) | |
| Unit 4 | Temperature Control Part I (10/05) |
| CH 11 | |
| Temperature Control Part II (10/12) | |
| Temperature Control Part III (10/19) | |
| Unit 5 | Flow Control Part I (10/26) |
| CH 12 | |
| Flow Control Part II (11/02) | |
| Unit 6 | Level Control Systems Part I (11/09) |
| CH 13 | |
| Level - Control Systems Part II (11/16) | |
| Un 7 | Analytical Instrumentation (11/23) |
| CH 14 | |
| LAB FINAL EXAM (11/30) | |
| WRITTEN FINAL EXAM (12/07) | |
College Policies, Resources and Supports
For information related to the Student Code of Conduct Policy, Withdrawal Policy, Email Policy, and Non- Attendance/Non-Participation Policy, please review the college’s Code of Campus Affairs and Regulations webpage, which can be found at catalog.kcc.edu under the Academic Regulations & Conduct Guide.
KCC offers various academic and personal resources for all students. Many services are offered virtually, as well as in person. Please visit Student Resources - Kankakee Community College to access student resources services such as:
- Clubs and organizations
- Counseling and referral services
- Office of disability services
- Student complaint policy
- Transfer services
- Tutoring services, etc.
The materials on this course are only for the use of students enrolled in this course for purposes associated with this course. Further information regarding KCC's copyright policy is available at https://kcc.libguides.com/copyright.
|Course syllabus/calendar is subject to change.